PSV-1110 Inlet separator relief valve
valve in U-11.
Not verified
Demonstration project - no figure here describes a real facilityChanges are not saved
Why
Each attribute carries the reading behind it. An attribute two documents dispute shows both rather than the more confident one.
Writes are validated against the engineering rules and then refused, because no database has been configured for this environment.
Attributes
| Attribute | Value | |
|---|---|---|
| type | Pilot operated | Unverified |
| set pressure | 96 barg | Unverified |
| capacity | 18 200 kg/h | Unverified |
Evidence
Every reading of this tag, with the parser and confidence behind it.
| Parser | As read | Confidence |
|---|---|---|
| eds-stroke-ocr | PSV-1110 | 60%Unverified |
| xlsx-reader | PSV-1110 | 100%Unverified |
Documents
| Document | Title |
|---|---|
| ZRF-PID-1101 | P&ID - Inlet Separation (scanned) |
| ZRF-REG-VR-001 | Valve Register |
Placement
- Tag
- PSV-1110
- Class
- valve
- Discipline
- PIP
- Unit
- U-11
- Subsystem
- Not established
- Test pack
- Not assigned
- Drawn on
- ZRF-PID-1101
What this record rests on
- Confidence
- 60%Unverified
- Readings
- 2
- Verified
- Not yet
The weakest link in the chain, not an average. Why
What stops this being used
- nothing machine-read is verified until a person has checked it