ZRF-ETR-0004 tables and figures
The tables this deliverable needs, where each one's data comes from, and which cannot be filled.
Why
A table is reported as fillable only when the register it draws from is a source document on this deliverable. Nothing is generated.
Writes are validated against the engineering rules and then refused, because no database has been configured for this environment.
Tables required
4
Fillable
0
Missing their source
4
Rows that cannot be stated
0
Figures required
2
A table with a hole in it is worse than no table
Tables
Each one's row count is the register's own, scoped to this deliverable. Open a table to see the rows it would carry.
| Table | What it needs | From | Rows available | Cannot be stated | |
|---|---|---|---|---|---|
| Test pressures by line | the line list, with design and test pressures | ZRF-REG-LL-001 not a source | none | — | Source not held |
| Equipment under test | the equipment register, scoped to the test pack | ZRF-REG-EQ-001 not a source | none | — | Source not held |
| Instruments to be isolated | the instrument index, scoped to the test pack | ZRF-REG-II-001 not a source | none | — | Source not held |
| Valve positions for the test | the valve register, with fail positions | ZRF-REG-VR-001 not a source | none | — | Source not held |
Instruments to be isolated
The rows this table would carry, drawn from ZRF-REG-II-001 and scoped to this deliverable.
The register this table draws from is not a source
Figures
| Figure | What it needs | |
|---|---|---|
| Test pack boundary marked up | the P&ID with the boundary confirmed | Placeholder only |
| Isolation schematic | the P&ID and the confirmed isolation list | Placeholder only |
A figure is a placeholder, with its caption and source named. Why